Purpose:
This command is used to capture the last executed function code in the '_last_fcode' system variable.
In the below example, the value of the '_last_fcode' is printed on the Cornelius Output window.
NOTE - Available from WS Version 1.2.295.0 and Liquid UI Server Version 3.5.522.0 onwards!
Liquid UI Code:
// SAPLSMTR_NAVIGATION.E0100.sjs
pushbutton([TOOLBAR], "'_last_fcode' - Test", '/nVA02', {"process":lastFcode});
function lastFcode(){
onscreen 'SAPMV45A.0102'
set('F[Order]','5004');
println('\nThe last fcode is:'+_last_fcode+':\n');
enter();
onscreen 'SAPMSDYP.0010'
println('\nThe last fcode is:'+_last_fcode+':\n');
enter();
onscreen 'SAPMV45A.4001'
set('V[z_va02_ponum]','&F[PO Number]');
println('\nThe last fcode is:'+_last_fcode+':\n');
enter('=T\\03');
onscreen 'SAPMV45A.4001'
println('\nThe last fcode is:'+_last_fcode+':\n');
enter('/6');
onscreen 'SAPMF02D.7000'
println('\nThe last fcode is:'+_last_fcode+':\n');
enter('=TAB04');
onscreen 'SAPMF02D.7000'
println('\nThe last fcode is:'+_last_fcode+':\n');
enter('/3');
onscreen 'SAPMV45A.4001'
println('\nThe last fcode is:'+_last_fcode+':\n');
enter('/3');
onscreen 'SAPMV45A.0102'
println('\nThe last fcode is:'+_last_fcode+':\n');
enter('/n');
onscreen 'SAPLSMTR_NAVIGATION.0100'
println('\nThe last fcode is:'+_last_fcode+':\n');
enter('?');
}
See attachments for code samples!
