Author Topic: Liquid UI Mobile Dedicated Key Press  (Read 7030 times)

Rahul Gera

  • GuiXT Forum
  • Newbie
  • *
  • Posts: 88
    • View Profile
Liquid UI Mobile Dedicated Key Press
« on: June 28, 2017, 04:46:05 PM »
Purpose: To dedicate System Keys for Liquid UI Mobile App

Usage Scenario:
1. When a FKey (F1...F12) is pressed on the Keypad, instead of Operating System function, dedicated Fkey action of SAP needs to take priority.

Pre-Requisites:
1. Active Sync or Windows Mobile Device Center software on Windows PC.
2. Liquid UI executable and the provided Liquid UI Mobile license in one folder (SynMobile).
3. MyMobiler software installed on PC (optional).

Steps to Map the Windows O.S. Keys on Handheld to Liquid UI Mobile Software:
Step 1: Connect the Handheld to computer (PC), so that the SynMobile Folder can be placed or accessed.
Step 2: If SynMobile Folder is on the Handheld, then Copy and Paste the Folder to PC.
Step 3: Open GuiXTMobile.sy3 (License File) that was provided or was copied on to PC.
Step 4: Enter the line UseOSKeysMapping=<binary> underneath/after LConnectCount entry.
            - binary specifies the mapping of system keys.
            - By default UseOSKeysMapping is set to 1.
            - For dedicated use of these keys, by Liquid UI, set UseOSKeysMapping=0.
Step 5: Save the file GuiXTMobile.sy3 in SynMobile Folder and place the folder on the handheld device.
Step 6: Close Liquid UI for Mobile application and start again to verify the change in using system keys.
« Last Edit: June 28, 2017, 05:04:49 PM by Rahul Gera »