Purpose:
To allows the users to configure barcode types so that the desired value can be populated in to the inputfield after barcode scan.
Steps to Configure Barcode Camera Scanner:
Step 1: Navigate to the option "Configure Barcode scanner" under settings from the connections list.
Step 2: Tap on the "+" symbol.
Step 3: Select the barcode type, enter comments, enable and Save.
Note: You can also use the option "Scan your barcode" if a particular type is not available in the dropdown list.
Step 4: Tap on the barcode type that was created.
Step 5: Tap on the "+" symbol.
Step 6: Enter Prefix, comments, enable - remove prefix, enter suffix, enable - remove suffix, select any option "Auto Enter" or "Auto Tab" based on your business requirement and save.
Step 7: Tap on back arrow.
Step 8: Tap on back arrow.
Step 9: Select the server to login.
Step 10: Navigate to the transaction and tap on the input field to scan.
Step 11: Camera will start and scan the value of the barcode to the desired input field.
Result: The barcode value that is populated to the input field will show the prefix and suffix eliminated and will also auto tab the position of the cursor as configured to the next control. (Refer Step.6 for configuration)
Original UPC-A Barcode Value: 022334545453 (Refer Step.11)
UPC-A Barcode Value fetched after scanning as seen below: 223345454
Note:
You can also disable or delete the configured barcode type using following steps:
Step 1: Navigate to the screen "Barcode Types", Tap and scroll to the left on the particular barcode type.
Step 2: Select option either Edit or Delete.
Step 2(a):
Disabling Configured Barcode type:
Result: The Barcode type's status will show as "Not Active".
Steps 2(b):
Delete Result: The Barcode type configuration will be deleted.
