Purpose:
To check value of the indexed variable set command must be used.
The set command will obtain the value of indexed variable into a regular variable which can be checked against the value.
Below example demonstrates the value check of the indexed variables using set command.
Liquid UI Code
////////////////////////////// SAPLSMTR_NAVIGATION.E0100 ///////////////////////////////
materialnumber = ["1001","1002","1003","1004","1005"]; // array with material numbers
for(idx=0;idx<5;idx++){
set("V[z_temp]" , materialnumber[idx]); // assigning values to temp variable using index
// conditions for checking value in temp variable
if (z_temp == "1005") {
println("Material at 5th position in materialnumber array>>>" +z_temp);
}
if (z_temp == "1004") {
println("Material at 4th position in materialnumber array>>>" +z_temp);
}
if (z_temp == "1003") {
println("Material at 3th position in materialnumber array>>>" +z_temp);
}
if (z_temp == "1002") {
println("Material at 2th position in materialnumber array>>>" +z_temp);
}
if (z_temp == "1001") {
println("Material at 1th position in materialnumber array>>>" +z_temp);
}
}
You can see output on Cornelius output window as per the conditions in script.
See attachment for screenshots
