Purpose: Device Camera as a scanner and Configuration
Steps to Configure Camera Scanner on Liquid UI iOS App
Step 01: Tap on the Menu (Right Top corner horizontal lines) on the Server connections screen.
Step 02: Tap on App Settings, and Tap on Configure Scanner.
Step 03: A Pop up with "Scanner Information" title comes up, tap OK, on the pop-up.
Step 04: The screen lands on "Barcode Types", with " Default" settings.
Step 05: Tap on "+" (right top corner) icon to add a barcode type.
Step 06: On "Add Barcode Type", in the Type field or use "Scan with Camera" button to scan the barcode using the device camera.
Step 07: Once the Barcode Type is added, make sure to enable the entry by tapping switch "Enabled" and tap "Save".
Step 08: This action Saves and Enables the Barcode Type, and the page goes back to "barcode Types".
Step 09: If more barcode types need to be added, please follow Steps 05 - Step 07.
Step 10: After the Barcode Type is added, enabled and saved in Step 07, and Step 08, tap on the newly added barcode type.
Step 11: On the Scanner Prefixes screen, Tap on "Default", to default the action that should occur after every scan of that particular barcode type.
- Auto Enter --> Performs Auto Enter after the scan
- Auto Tab --> Performs Auto Tab after the scan
- Off --> No action is called
Step 12: Tap on "+" to perform a default action of Prefix and Suffixes after Step 10.
Step 13: Add the Prefix, and choose, if it needs to be removed from the result after every scan of that code type
Step 14: Add the suffix, and choose, if it needs to be removed from the result after every scan of that code type
